Image AS Standards
When planning the installation of glass pool fencing, it’s crucial to consider not only its aesthetic appeal and physical barriers but also the adherence to specific electrical safety standards. A key factor often overlooked is the requirement for equipotential bonding (earth bonding) of metal components, such as spigots and posts, in pool fencing systems. This article will delve into the intricate details of these guidelines, helping homeowners ensure both safety and compliance.
Equipotential bonding is a vital safety requirement for any glass pool fence installed within 1.25 metres (or 1250 millimetres) of the water’s edge. This regulation, as outlined in the Australian Standard AS/NZS3000:2007 Sections 5.6.2.5 and 5.6.2.6, mandates that metal elements of the pool fence must be earthed. This process involves connecting all conductive parts (metal posts, spigots, handrails) of the pool fence with an electrical wire, forming an equipotential bond. This bond is then grounded to an earthing point.
Earthing the pool fence ensures that it holds the same electrical potential as other conductive parts in the vicinity, such as the pool’s reinforcing steel shell, metal fixtures, and nearby electrical appliances. The primary goal is to minimize the risk of electric shock from electrical faults. The connection point for this system should be accessible and testable, often located in the reinforcing steel of a concrete slab or wall.
Installing equipotential bonding is a complex process that requires attention during the planning stage of your pool area. This system involves laying earth wires beneath the surface, leading back to an earthing point, usually near the house’s powerboard. It’s important to note that this installation must be completed before laying pavers or tiles. All is not lost if you have gone past this stage. There are possibly other options that may help such as non conductive pool fence hardware. Contact us for more information.
Only a certified, licensed electrical contractor can carry out the installation of equipotential bonding. They ensure that the bonding arrangements meet the Wiring Rules and issue a Certificate of Test to confirm the electrical work’s safety and compliance. This certification is not only a guarantee of safety but also a legal requirement.
If you’re in the process of planning your pool area, our team can provide invaluable advice and assistance. By involving us early in your project, we can point you in the right direction of a licenced professional who can ensure electrical safety compliance, potentially saving you significant time and money. For more detailed information and expert guidance on glass pool fencing, please contact us. We are here to ensure your pool area is not only stunning but also help you be safe and compliant with relevant regulations.
For more information visit the following links:
These days our intake is very limited, spanning out to 4 years sometimes. There is… Read More
What is low iron glass and why do we use it for splashbacks? Read More
Since Harbour Glass first opened their doors over 12 years ago, one thing remains the… Read More
We get asked a lot what we clean glass in the factory with and the… Read More
Zip Pay is now available in-store at Harbour Glass, ask us how. Read More
This website uses cookies.